Page 1
How to find and resolve Toner Sensor Errors: iColor 500, 600 and 700 If your printer displays a toner sensor error please check the following: Please carry out the following instructions if you receive one of the following error codes:...
Page 2
How do I find the Toner Sensors? Press the cover release and open the top cover fully and note the positions of the four cartridges: There are two sensors for each toner: one on the drum (TS1) and one on the machine (TS2).
Page 3
Toner Sensor Errors A toner sensor error is displayed when the machine is no longer able to detect the toner cartridge / drum unit, or is no longer able to determine how much toner is left in the units. How to clear the Toner Sensor Errors If your printer displays a toner sensor error please power off the printer and check the following: Check that all the blue toner levers are pushed firmly towards the back of the...
Page 4
Correct Position Incorrect Position If it is incorrect it can sometimes result in the blanking disc not being pulled out of the way, this results in the sensor on the machine not picking up the sensor on the drum. Pushing the disc up will resolve the problem. The disc will not fall back down again, providing that the blue Toner Lever is pushed firmly to the back of the machine.