Noise And Vibration; Technical Specifications - Wolf WS125 18.0V Original Operating Instructions

Use only original batteries with the

voltage indicated on the type plate of
your power tool. The use of other
batteries, e.g. imitations, reconditioned
batteries or other makes, increases the risk
of injury and damage to property by
exploding batteries.
Recharge batteries only with chargers

recommended by the manufacturer.
A charger that is suitable for one type of
battery may create a fire hazard when used
with another battery.
The battery may be damaged by pointed

objects such as e.g. nails or screwdrivers
or by external application of force. This
may give rise to an internal short circuit,
causing the battery to burn, smoke,
explode or overheat.
The mains voltage and the voltage

specifications on the rating plate must
correspond.
Do not press the spindle lock until the

grinding tool stops.

Noise and vibration

The noise and vibration values have been
determined in accordance with EN 60745.
The A evaluated noise level of the power
tool is typically:
– Sound pressure level:
– Sound power level:
– Uncertainty:
Total vibration value:
– Emission value when ...
– surface grinding:
– cutting-off:
– Uncertainty:
CAUTION!
The indicated measurements refer to new
power tools. Daily use causes the noise and
vibration values to change.
NOTE
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
EN 60745 and may be used to compare one
tool with another. It may be used for a prelimi-
nary assessment of exposure. The declared
vibration emission level represents the main
18
84 dB(A);
95 dB(A);
K = 3.0 dB.
2
a = 5.1 m/s
h
2
a = 2.8 m/s
h
2
K = 1.5 m/s
applications of the tool. However if the tool is
used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This may significantly
increase the exposure level over the total
working period.
However if the tool is used for different
applications, with different accessories or
poorly maintained, the vibration emission may
differ. This may significantly decrease the
exposure level over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories,
keep the hands warm, organisation of work
patterns.
CAUTION!
Wear ear protection at a sound pressure
above 85 dB(A).

Technical specifications

Machine type
Nominal voltage
Battery
Max. grinding tool Ø
Grinding tool thickness
Shaft thread
Spindle thread
Speed
Weight according to
"EPTA Procedure
01/2003" (without
battery)
Weight of battery 5.0 Ah kg
WS125 18.0V
WS125 18.0V
Angle grinder
V 18
AP 18.0/5.0
mm 125
mm 1–6
mm 22.23
M14
r.p.m. 8,500
kg 1.7
0.72