Manual Angle Adjustment; Adjustment With Geardrive (Optional Available) - KS P LINE User Manual

POWER LINE ARRAY

MANUAL ANGLE ADJUSTMENT

ADJUSTMENT WITH GEARDRIVE (optional available)

In addition to the conventional solution with different static fixing points for the ball lock pins, KS
AUDIO developed the geardrive mechanism. The gear unit enables stepless angle adjustment after
assembly, whether flying or stacked. Any commercially available electric/cordless screwdriver with
P LINE OPERATING INSTRUCTIONS
Your P LINE elements are connected with the ball lock
pins supplied. At the front there are two fixed points,
each at the top and bottom. A third connection on the
rear can be changed in 2.5 degree steps. The illustration
shows the position to be used in each case.
The optimal number and the angle setting depend on the
size of your location and the required sound pressure.
With designated EASE FOCUS 2 data sets, correct array
setup may be calculated, plus right eq setting can be
found as controller preset within KS AUDIO amplification.
Just choose array length/number and curving/splay
between two flanking line array elements and speaker
set-up is finished and ready to go.
¼" bit can be used to define
stepless angles. This allows fine
adjustment for an already
installed array without manual
effort or risk for the operator.
For more Information please
ask your dealer.
6 | P a g e