Related Manuals for KS LINE-MASTER
Summary of Contents for KS LINE-MASTER
- Page 1 PERATION NSTRACTIONS ASTER ACTIVE DIGITAL TUDIO EFERENZ PEAKER Gesellschaft für digitale Studiotechnik mbH...
- Page 2 KS DIGITAL PARTNERS FOR DIGITAL STUDIO TECHNOLOGY AM DÖRRWALD 5 D-66571 EPPELBORN / GERMANY INFO@KSDIGITAL.DE WWW.KSDIGITAL.DE FURTHER INFORMATION AVAILABLE UNDER WWW.KSDIGITAL.DE KSDIGITAL GMBH AM DÖRRWALD 5 D-66571 EPPELBORN / GERMANY TEL: +49 6827 305915 FAX: +49 6827 305916 STAND: NOV. 1. 2006...
-
Page 3: Safety Instructions
Safety Instructions 1. Please read these instructions – You should read all information concerning safety and operation before you use this equipment. 2. Please keep this manual – You may need it in the future. 3. Please observe the warnings – All warnings on the equipment and in this manual should be observed by you in the interests of your own safety. -
Page 4: Table Of Contents
CONTENTS Safety Instructions CONTENTS SOUNDS RIGHT IN ROOM AND TIME KSDIGITAL – FEATURES OF THE LINE-MASTER REFERENCE MONITOR LINE-MASTER – THE REFERENCE THROUGH DIGITAL PRECISION FREQUENCY AND PHASE – DIAGRAMS REAR VIEW / CONTROLS OPERATION PARAMETER TABLES SCREEN SHOT OF THE REMOTE CONTROL SOFTWARE DIGITAL INTERFACE –... -
Page 5: Sounds Right In Room And Time
For more than 20 years, KS has created world class sound transmission devices and has always followed one aim; the reproduction of genuine and lifelike sound. KS products can be found in the inventory of the most illustrious operas such as the Semper Oper Dresden, Alte Oper in Frankfurt, Schauspiel Frankfurt, Kammerspiele Munich even in the parliament building in Berlin, the Reichstag etc. - Page 6 3dB for every doubling of the distance as opposed to the 6dB of a spherical wave. In this way, the near field of the Line-Master extends to listening areas at otherwise too greater a distance. On top of this, the sound is emitted directionally, resulting in fewer reflections from walls and ceilings and more direct sound, giving a much more exact reproduction with defined impulses and differentiated sound.
-
Page 7: Ksdigital - Features Of The Line-Master Reference Monitor
KSDIGITAL – FEATURES OF THE LINE-MASTER REFERENCE MONITOR ANALOGUE INPUT: Symmetrical XLR input (20dBu Head Room) utilizing 27Bit conversion technology. DIGITAL INPUT: AES3-Input for digital signals. The channel to be used is specified in the main selection menu by selecting the appropriate box. The input sampling frequency is in the range of 30-110kHz. -
Page 8: Line-Master - The Reference Through Digital Precision
LINE-MASTER – THE REFERENCE THROUGH DIGITAL PRECISION The Line-Master is an active 3.5 way studio monitor designed for up to high volumes. The signal processing, such as equalization, cross-over and correction of the transient behavior of the components, is taken care of completely at a digital level. The connection to an existing, digital studio environment occurs digitally via the AES3 interface. - Page 9 impulsrespons without FIRTEC - processing impulsrespons with FIRTEC - processing amplituderesponse without FIRTEC (green) amplituderesponse withFIRTEC (red) phaseresponse without FIRTEC (green) phaseresponse with FIRTEC (red)
- Page 10 Rotary control with two-line display to set parameters Digital IN, OUT Analogue IN Remote Control OUT Remote Control IN Mains Socket with Mainswitch Fuse...
-
Page 11: Operation
ADM-REMOTE. The parameters that can be individual changed are visible in the display of the amplifier and on the screen. Manual Operation The manual operation of the Line-Master occurs via a rotary knob with an additional short-hub, push button function. The two-line display shows the parameter name and its adjustable value. - Page 12 Description Function Range of Values Volume Total volume 0dB … -31dB Filter 1 Frequency X/26 Frequency band of Filter 1 27 frequency bands Gain Relative level of the correction filter +6dB … -6dB Q-Factor Frequency bandwidth 0.1,…, 5.0 Filter 2 Frequency X/26 Frequency band of Filter 1 27 frequency bands...
- Page 13 PC Screen shot of the ADMControl Software...
- Page 14 Master Remote control to control parameters Connection to the next Line-Master digital IN socket In a studio environment, a digital connection is made by connecting the AES signal with the Digital IN socket of the ‘right’ speaker. The left speaker is connected to the active Digital OUT socket of the first speaker.
- Page 15 technical informations: frequency range: 20 - 24000 Hz (+/-3dB) sensitivity: +20dBu AD / DA converter: 27 bit/192KHz sigma delta, 64x oversampling, gainstacking analog IN XLR-symmetric digital IN, OUT: optional: AES3 format, 32 - 110 KHz, XLR-symmetric DSP: 60 MHz 32 bit floatingpoint, 1500 dB dynamic process: FIRTEC equalization, FIR-crossover, limiter, 3 parametrc EQs, 2 FIR- presets, digital floatingpoint gain control, delay...