Advertisement
Wood ADA Locker Bench (with back)
Thank you for selecting Salsbury Wood ADA locker benches. We are confident that the quality and construction of this product will provide years of
maintenance free use.
Preliminary Notes
There are two basic steps to assembly and installation:
1. The bench pedestals must be assembled to the bench top.
2. The bench assembly must be bolted to the floor.
Failure to bolt the bench assembly to the floor could result in
injury to persons sitting on the bench.
Since various types of floors require different types of fasteners, floor
installation hardware is not provided.
Two bench pedestals are provided with identical bench tops. All
necessary holes are pre-drilled in the wood bench tops. Sixteen (16)
1/4" diameter x 1" long lag screws are provided for attaching the bench
pedestals to the bench tops.
Assembly & Installation Instructions
Assembly
Place one bench top upside down on a flat raised work surface, so that
the pre-drilled holes are facing up. Align the vertical members of the
two bench pedestals with the two rows of pre-drilled holes, as shown
in Figure 1. Fasten pedestals to the bench top using the eight (8) lag
screws, and install round hole plugs in all holes on the pedestals'
vertical members.
Place the remaining bench top upside down on the work surface. Align
the horizontal members of the pedestals as before, and as shown in
Figure 2. Fasten pedestals to the bench top using the remaining lag
screws, and install round hole plugs on the horizontal members.
Complete the installation by fastening the assembled bench to
the floor.
Advertisement
