Specifications - Makita DUA250 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Overall length (without guide bar)
Rated voltage
Net weight
Standard guide bar length
Recommended guide bar
length
Applicable saw chain type
(refer to the table below)
Standard sprocket
Chain speed
Chain oil tank volume
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended battery adapter
Battery adapter
• The battery adapter(s) listed above may not be available depending on your region of residence.
• Before using the battery adapter, read instruction and cautionary markings on the battery adapter.
with 90PX
with 91PX
Number of teeth
Pitch
6.1 - 6.8 kg (13.4 - 15.0 lbs)
BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
2 ENGLISH
DUA250
2,235 mm
(88")
D.C. 36 V
250 mm
(10")
250 mm
(10")
250 mm
(10")
90PX
91PX
6
3/8"
0 - 20 m/s
(0 - 1,200 m/min)
(0 - 3,940 ft/min)
3
160 cm (5.4 fl oz)
DC18SH
PDC01