Know Your Device - TeckEpic i7A Quick Use Manual

When the connection between the bracelet and the
phone fails, please try the following methods:
1. Make sure that the mobile phone and the bracelet are within a
valid distance, try to turn off the Bluetooth and turn on again to
connect the bracelet.
2. Please restart the bracelet, check the correct pairing code, and
search for connections on the phone.
3. Please restart the phone, turn on Bluetooth again, search for
pairing code, and connect.
Note:
1. System Requirement: IOS 9.0 or above; Android 4.4 or above.
2.Bluetooth Working Range: Within 10m.
3.Make sure your tracker's battery isn't critically low.

KNOW YOUR DEVICE

1. Wearing method
Wear the device on your wrist horizontally, about 2cm to carpal,
the same method as wearing watches.
Note:To monitor heart rate more accurately, please wear the
device on the upper position of your wrist and a bit tighter than
usual when you are taking exercise.
2. Methods of displaying the screen
Touch screen Raise hand
02
Turn over the wrist