Traco Super-Sealer Owner's Manual

LIMITED EQUIPMENT WARRANTY

Every Shrink Packaging System is thoroughly inspected and tested before leaving
the factory warehouse. If any trouble should develop during warranty period, return
the complete system prepaid to Traco Manufacturing, Inc. If after inspection, the unit
is found to have defective workmanship or material, all due repairs will be made
free-of-charge.
This warranty does not apply when: repairs or attempted repairs have been made
by non-factory personnel; repairs are required due to normal wear; the system has
been abused or involved in an accident; the unit has been overloaded beyond its
rated capacity; the system has been used with improper accessories; or the system
has been used after partial failure.
Installation and operation of the equipment must comply with all applicable electrical
and safety standards and is the sole responsibility of the purchaser.
NO OTHER WARRANTY, WRITTEN OR VERBAL IS AUTHORIZED
Parts not covered under the warranty due to normal wear:
Teflon Tape; Sponge Rubber Sealing Pad; Nichrome Wires; Arm Springs.
Length of Warranty - 2 Years (1 year warranty on heat gun)
If you encounter any questions that you feel are not addressed in the owners guide
please contact us at info@traco-mfg.com & let us know. We are always anxious to
hear from our customers.
Cut & Mail
_______________________________________
NAME
_______________________________________
COMPANY
_______________________________________
ADDRESS
_______________________________________
CITY/STATE/ZIP
620 SOUTH 1325 WEST
OREM, UTAH 84058
STAMP
Super - Sealer
SHRINK WRAP SYSTEM
OWNER'S GUIDE
REVIEW ENCLOSED INSTRUCTIONS CAREFULLY
BEFORE USING THE SUPER-SEALER
TM
Return Warranty Card for FRE
See enclosed for
™