Page 1
SuperSealer ™ S H R I N K W R A P S Y S T E M FREE Maintenance Kit See Warranty Card OWNER’S GUIDE PURCHASE DATE: PURCHASED FROM: DEALER PH NUMBER: SERIAL NUMBER: ______________ _______________ __________________ __________________ ABC Office 142 West Flint Meadow Drive Tel: +1 (800) 658-8788 Kaysville, Utah 84037...
Page 2
Safety Instructions Before using your new Traco SuperSealer, please take a few minutes to carefully read all the instructions. Pay close attention to safety guidelines and warnings included for your protection. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Always wear eye protection and protective work gloves at WARNINGS for SuperSealer system all times.
Page 3
Traco Mfg. Inc. for cooling the heatgun between uses. Avoid Heatgun cleaning instructions: laying the heatgun on its side.
TROUBLE SHOOTING / RECOMMENDATIONS Symptom: Centerfold shrink film will not separate or open. Recommendation: If shrink film appears to be single sheet, place a strip of tape on top of the film and on the bottom and pull apart to initially separate. Symptom: Film appears to smoke or is sticking to wire when seal is made.
If you encounter any questions you feel are not addressed in this owner’s guide, please contact us at info@traco-mfg.com and let us know. We are always anxious to hear from our customers. P.O. BOX 1065, OREM UT 84059 Cut &...
Need help?
Do you have a question about the SuperSealer SS-13 and is the answer not in the manual?
Questions and answers