Playing Duo - Yamaha Clavinova CLP-725 Owner's Manual

Playing Duo

This function allows two different players to play the instrument, one on the left and the other on the right,
over the same octave range and with the same Voice.
1.
While holding down [PIANO/VOICE], press [+R] and [–L]
simultaneously to engage Duo.
The keyboard is divided into two sections, with the E3 key as the Split Point.
Equivalent to C3
(middle C)
Left section (Voice 2)
2.
One person can play the left section of the keyboard while
the other plays the right.
The pedal function changes as follows.
• Right Pedal: Applies Sustain to the right section.
• Center Pedal: Applies Sustain to both sections.
• Left Pedal: Applies Sustain to the left section.
To shift the Octave for each section:
Same operation as in Dual (page 22).
To adjust the volume balance between two keyboard sections:
Same operation as in Dual (page 22).
3.
To exit from Duo, simultaneously hold down [PIANO/
VOICE] and press [+R] and [–L].
Selecting the Duo type
You can set how the sound is emitted from the speakers. When you select
"Separated," the sound of left part is emitted from the left speaker, and the sound
of right section is emitted from the right speaker. When you select "Balanced,"
the sound of both parts are emitted from both speakers in a natural balance.
While holding down [PIANO/VOICE], press the A4 key or the A#4 key to
change the setting.
Equivalent to C3
Split Point E3
A4 (Separated) A#4 (Balanced)
Playing Various Musical Instrument Sounds (Voices)
(middle C)
Right section (Voice 1)
Highest key
NOTE
• The Split Point cannot be
changed from E3.
• In Duo, VRM is not effective.
• When the Duo type is set to
"Separated," Reverb and
Binaural Sampling/
Stereophonic Optimizer are
not effective.
• If the keyboard is in Dual
mode, engaging Duo will exit
from Dual, and Voice 1 is
used over the entire range of
the keyboard.
Setting range:
-2 – 0 – +2
Setting range:
-6 – 0 – +6
Default setting:
Separated
CLP-725 Owner's Manual
23