Advertisement
Quick Links
Get parts or technical assistance online at
www.fusiondrillpowered.com
or call (800) 345-6007
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Drill not included.
Operator Manual
Fusion
Drill-Powered Cultivator
Model Number:
33061
© 2020 Ardisam
All Rights Reserved
REV 1: 03/30/2020
™
P/N: 33299
ECN: 12860
Advertisement
Related Manuals for Fusion 33061
Summary of Contents for Fusion 33061
- Page 1 Operator Manual Fusion ™ Drill-Powered Cultivator Model Number: 33061 Drill not included. © 2020 Ardisam All Rights Reserved Get parts or technical assistance online at P/N: 33299 www.fusiondrillpowered.com ECN: 12860 or call (800) 345-6007 REV 1: 03/30/2020 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
- Page 2 Warranty ....18-19 INTRODUCTION _________________________________ Thank you for purchasing your product Date of Purchase from Fusion™. We have worked to ensure that this product meets the highest _________________________________ Get parts online at www.fusiondrillpowered.com or call 800-345-6007 M-F 8-5 CST.
- Page 3 Drill-Powered Cultivator 33061 Model Number: BEFORE OPERATING EQUIPMENT: to make sure state laws and other laws are followed. All persons to whom rent/ PLEASE READ THIS loan this unit must have access to and SECTION CAREFULLY. understand this information. This manual...
- Page 4 Drill-Powered Cultivator 33061 Model Number: DANGER KEEP AWAY FROM ROTATING TINES. ROTATING TINES WILL CAUSE INJURY. NOTICE NOTICE INDICATES YOUR TOOL CAN BE DAMAGED IF THE SAFETY INSTRUCTIONS THAT FOLLOW THIS SIGNAL WORD ARE NOT OBEYED. IMPORTANT IMPORTANT INDICATES HELPFUL INFORMATION FOR PROPER AS- SEMBLY, OPERATION OR SET-UP OF YOUR TOOL.
- Page 5 Drill-Powered Cultivator 33061 Model Number: WARNING YOU MUST READ, UNDERSTAND AND COMPLY WITH ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPT- ING TO SETUP AND OPERATE YOUR TOOL. FAILURE TO COMPLY WITH ALL SAFETY AND OPERATING INSTRUCTIONS CAN RESULT IN LOSS OF TOOL CONTROL, SERIOUS PERSONAL INJURY TO YOU AND/OR BYSTANDERS, AND RISK OF TOOL AND PROPERTY DAMAGE.
- Page 6 Drill-Powered Cultivator 33061 Model Number: • Do not operate tool when fatigued or • Stop the drill when crossing gravel under the influence of alcohol, drugs drives, walks, or roads. or other medication which can cause • Watch for traffic when operating near, or drowsiness or affect your ability to oper- when crossing roads.
- Page 7 Drill-Powered Cultivator 33061 Model Number: SERVICE may cause loss of control. • Always disconnect the drill whenever • Always run the drill on its lowest speed you leave the equipment, before clean- and with the clutch torque adjusted to its ing, repairing, or inspecting the unit.
- Page 8 Drill-Powered Cultivator 33061 Model Number: FEATURES Read this operator manual and safety rules before operating your cultivator. Take time to compare the following illustration with the cultivator to familiarize yourself with the product. Powered by Your Own Drill (drill not included)
- Page 9 Drill-Powered Cultivator 33061 Model Number: SPECIFICATIONS TILLING WIDTH 4.25 IN MIN. - 8 IN MAX TILLING DEPTH 5.5 IN TRANSMISSION GEAR RATIO 1.2:1 TINE SPEED / ROTATION VARIABLE / DUAL DIRECTION INPUT HEX SIZE 8 MM UNIT WEIGHT (EXCLUDING DRILL) 6.5 LB...
- Page 10 (E) and two hand knob nuts (D). Though the handle can be installed in either direction on the extension, it is most common to have the Fusion™ logo FIGURE 3 facing toward the op- erator and drill. Be sure...
- Page 11 Drill-Powered Cultivator 33061 Model Number: the other hand knob nut onto the other bolt that passes through the left and right torque arms, but do not tighten. SEE FIGURE 4 6. Assemble extension assembly to trans- Torque mission assembly with hand knob nut (D) and bolt (H).
- Page 12 5. In softer soil, the Fusion™ cultivator able battery size. SEE FIGURE 5 can be operated with just one hand, 5. Tighten the hand knob nut on the much like a household vacuum cleaner.
- Page 13 STARTING AND STOPPING it is most common to have the Fusion™ THE UNIT logo facing toward the operator and drill. Review the drill manufacturer’s SEE FIGURE 7 instructions for safe operation of the drill.
- Page 14 Drill-Powered Cultivator 33061 Model Number: 6. Secure the handle (O) to the transmis- or removed during repair, that they are sion assembly using hand knob nut (D) secure and fit correctly. Note: All repair parts must come hand tightened firmly onto bolt (H).
- Page 15 ‘Contact Us’ page on our website. repair-free life for your Fusion™ cultivator. For any problems and/or repair with your Most repairs will be minor and easily fixed drill, please consult your drill’s manu-...
- Page 16 Drill-Powered Cultivator 33061 Model Number: ILLUSTRATED PARTS BREAKDOWN - Extension Assembly REF. / PART NO. QTY. REP. / N° RÉF. DESCRIPTION / QTÉ 34078 KNOB NUT M6X1.0 34585 EXTENSION 18103 BOLT M6X1.0X40 MM 34582 RUBBER STRAP 35789 SPACER M6X17.5X10 MM (Optional)
- Page 17 Drill-Powered Cultivator 33061 Model Number: ILLUSTRATED PARTS BREAKDOWN - Transmission Assembly REF. / PART NO. QTY. REP. / N° RÉF. DESCRIPTION / QTÉ 33106 TINE 33107 HAIR PIN 34589 TRANSMISSION 23866 NUT M4X0.7X5 MM 34806 TINE SHIELD BRACKET 33065 BOLT M4X0.7X14 MM...
- Page 18 Warranty Terms and Conditions PRODUCT WARRANTY: 1-YEAR LIMITED WARRANTY Ardisam, Inc., warrants this Fusion™ Drill-Powered Cultivator under a one-year limited warranty to be free from defects in materials or workmanship or both for a period not exceeding twelve consecutive months from the date of original purchase by the first retail consumer or commercial end user.
- Page 19 Ardisam, Inc. shall not be obligated to ship any repair or replacement product to any location outside of the United States of America or Canada. Fusion™, Division of Ardisam, Inc. 1160 8th Avenue, PO Box 666 Cumberland, WI 54829 800-345-6007 | Fax 715-822-4180 E-mail: info@fusiondrillpowered.com...
- Page 20 1160 Eighth Avenue Phone: (800) 345-6007 PO Box 666 Fax: (715) 822-2124 Cumberland, WI 54829 www.fusiondrillpowered.com...
Need help?
Do you have a question about the 33061 and is the answer not in the manual?
Questions and answers