Menu & Settings - FDS MLED-CTRL Box User Manual

MLED-CTRL Box
3. Menu & Settings
Display and Mode parameters can be defined via 2 different methods.
a) Navigating the display integrated menu using the onboard display push buttons
b) Using our iOS application
c) Using our PC application
3.1. Display Menu hierarchy
To enter the display menu, press the illuminated orange button for 3 seconds.
Once in the menu use the illuminated Green button to navigate through the menu and the
illuminated Orange button to make a selection.
Depending on the mode selected or activated options status some menu items may be not visible.
Main menu:
- MODE SETTINGS
- MODE SELECTION
- GENERAL SETTINGS
- EXT INPUTS
- RADIO
- EXIT
General Settings:
- DISP INTENSITY
- BIG FONTS
- GPS STATUS
- LICENSE CODE
- EXIT
Mode Selection:
- USER CONTROL
- TIME/TEMP/DATE
- START/FINISH
- SPEED
- COUNTER
- COUNTDOWN
- EXIT
Mode Settings (Display Mode)
- LINES ADDRESS
- LINES COLOR
- BAUDRATE
- PROTOCOL
- EXIT
August 2020 - Version EN 1.1
www.fdstiming.com
(Define the parameters of the selected mode)
(Select a mode. Some modes need to be activated first with a code from your supplier)
(Display general settings)
(Parameters of the 2 external inputs – Jack connectors)
(Radio settings and WIRC wireless photocell pairing)
(Leave the menu)
(Change the default display intensity)
(change the full height fonts)
(Display the GPS status)
(Enter a license code to activate additional modes)
(Leave the menu)
(Standard display mode to be used with iOS App or RS232 connection)
(Display the time of date, time or temperature or all three scrolling)
(Start / Finish - With running time)
(Speed trap)
(Input 1 increments Counter, Input 2 decrements Counter, reset with Input2 long press)
(Count Down Start/Stop with Input 1 impulse, reset with Input2)
(Leave the menu)
(Set the line number for each zone)
(Set the color of each zone)
(Select the RS232/RS485 baud rate)
(Select the RS232 output protocol)
(Leave the menu)
User manual