INSTRUCTION This Manual provides information for ease of installation and operation of the receiver module and remote control. Keep these instructions fo future reference. CONTENTS RECEIVER MODULE REMOTE CONTROL WARNING DISCONNECT ALL ELECTRICAL POWER TO UNIT BEFORE INSTALLING THE RECEIVER MODULE. FAILURE TO DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.
Page 4
Step 3: Place the Receiver wires in the strain relief notch Strain Relief Notch on the back of the module. Receiver Module Step 4: Insert receiver connector to mating connector. Remote Control Signal Receiver Step 5: Attached the Receiver module by inserting the three mounting legs into the corresponding holes on the electrical control box.
REMOTE CONTROL OPERATION NOTE: Be sure there is no obstruction between receiver and remote control. Do not drop or throw the remote control. Do not let any liquid in the remote control and put the remote control directly under the sunlight or any place where is very hot. BUTTONS AND FUNCTIONS OF REMOTE CONTROL Not All Features Are Activated Signal Transmitter...
Page 6
REMOTE CONTROL OPERATION BUTTONS AND FUNCTIONS OF REMOTE CONTROL Not All Features Are Activated TIMER TIMER Button Press the TIMER button while the unit off. ● Selecting the setting hours 0.5 - 24 will turn the unit on after the selected hours have expired.
START-UP GUIDE 1.Energize the unit, and then press ON/OFF button to turn on the unit. 2. Press MODE button to select the running mode (Cool, Dry, Fan or Heat). 3. Press + or - button to set the desired temperature. 4.
WARRANTY International Refrigeration Products Inc. warrants that the product supplied is free from defects in material and workmanship. This warranty is valid as long as this product is properly handled, installed, operated, and serviced in accordance with the Installation and Operating Instructions shipped with this unit, and the warranty is completed and mailed no later than 30 days after date of purchase.