Page 1
RESH72 / RESHDRKT / RESHGDRKT Resi™ Hutch with Doors Model RESH72 shown Model RESH72 + RESHDRKT shown Model RESH72 + RESHGDRKT shown For questions or concerns, please call 1-888-971-6225 Available Monday - Friday 7:30 AM to 5:00 PM (Central Time) (English-speaking operators) www.safcoproducts.com 990000344: 1 of 9;...
PARTS LIST Spare Qty. Name Part Qty. Wood Dowel Cam Post Cam Lock Cam Sticker Stand-off Ø20*76 Screws M6*25 Screws Ø3.5*35 RESH72WH HB Pre-Assembled Replacement Part List Screws M8*25 990000344: 2 of 9; Rev A; Rev Date: 17-DEC-2020...
Page 3
PARTS LIST Qty. Qty. Name Part Name Part Right Divider Panel Shelf Panel Left Side Panel Back Panel + Q1 Right Side Panel Wall Mounting Board Bottom Panel Left Divider Panel 990000344: 3 of 9; Rev A; Rev Date: 17-DEC-2020...
Page 4
PARTS LIST Pre-Assembled Replacement Part List Spare Qty. Name Part Qty. Screw Ø4 x 16mm Handle with Screws Door Wing for Hinge Door Wing for Hinge Bumper Screw Ø4 x 16mm RESHGDRKT RESHDRKT Qty. Qty. Name Part Name Part Left Door Left Door Right Door Right Door...
Page 5
These instructions are provided to avoid problems that may occur from improper assembly or installation. SAFCO and/or its distributor are not responsible for failure resulting from improper assembly or installation of this product. Moreover, all warranties are void for failure to follow these assembly instructions.
Page 6
NOTE: Insert Cams first, and align arrow towards the hole the cam post fits into. NOTE: Insert Cams first, and align arrow towards the hole the cam post fits into. 990000344: 6 of 9; Rev A; Rev Date: 17-DEC-2020...
Page 7
NOTE: Insert Cams first, and align arrow towards the hole the cam post fits into. 12 B 12 C NOTE: Insert Cams first, and align arrow towards the hole the cam post fits into. 990000344: 7 of 9; Rev A; Rev Date: 17-DEC-2020...
Page 8
NOTE: Step only if RESHDRKT or RESHGDRKT are ordered W1 or W Bumper V1 or V 990000344: 8 of 9; Rev A; Rev Date: 17-DEC-2020...
Page 9
Safco does not take responsibility for safe, proper fastening. To Hang Hutch - Position hutch so that Hutch Assembly is above Wall Mounting Board and lower Hutch Assembly until Wall Mounting Board lock together.
Need help?
Do you have a question about the Resi RESH72 and is the answer not in the manual?
Questions and answers