Office Star Products pro-line II 90662 Operating Instructions

FAUTEUIL DE DIRECTION À DOSSIER À MAILLES
7
6
12
15
8L
10
9
14,9
13
4
3
1
2
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier les quantités des pièces.
ÉTAPE 1 Insérer les cinq roulettes (2) dans la base (1). Pousser fermement jusqu'à ce que les roulettes (2) s'encliquettent. Insérer le vérin pneumatique (3)
dans la base (1). Glisser le soufflet (4) sur le vérin pneumatique (3).
ÉTAPE 2 Aligner les trous des accoudoirs (8L et 8R) sur les trous du coussin du siège (6), fixer les accoudoirs (8L et 8R) avec un bouton (13), une rondelle
plate (9) et une rondelle en étoile (10) pour chaque accoudoir. RESSERRER COMPLÈTEMENT TOUS LES BOUTONS (13).
ÉTAPE 3 Fixer le mécanisme (5) au coussin du siège (5) avec la flèche vers l'avant du siège avec six vis du mécanisme (11). RESSERRER
COMPLÈTEMENT TOUTES LES VIS.
ÉTAPE 4 Fixer le support du dossier (15) à l'assemblage du dossier (12), fixer le support du dossier (15) à l'arrière du mécanisme (5) avec trois vis de support
(14) et trois rondelles plates (9). RESSERRER COMPLÈTEMENT TOUTES LES VIS.
ÉTAPE 5 Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, VOUS ASSURER D'AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
90662
INSTRUCTIONS DE MONTAGE
8R
10
9
5
13
11
PIÈCE
1. . . . . . . . . . . . . . . . . . . . . . . . . 1
Base
2.
Roulettes . . . . . . . . . . . . . . . . . . . . 5
3. . . . . . . . . . . . . . 1
Vérin pneumatique
4.
Soufflet . . . . . . . . . . . . . . . . . . . . . . 1
5. . . . . . . . . . . . . . . . . . . . 1
Mécanisme
6.
Coussin du siège . . . . . . . . . . . . . . 1
7.
Assemblage du dossier
8.
Accoudoirs (8L et 8R)
9. . . . . . . . . . . . . . . . . . 5
Rondelle plate
10.
Rondelles en étoile
11.
Vis du mécanisme.
12.
Vis de dossier. . . . . . . . . . . . . . . . 4
13. . . . . . . . . . . . . . . . . . . . . . 2
Bouton
14.
Vis de support . . . . . . . . . . . . . . . . 3
15.
Support du dossier (préinstallé)
16.
Clé Allen (non montrée)
© Office Star Products Août 2013
5
2
3
1
QTÉ
. . . . . . . . . . 1
. . . . . . . . . . . 2
. . . . . . . . . . . . 2
. . . . . . . . . . . . 6
LIMITED WARRANTY
Pro-Line II chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
. . . 1
. . . . . . . . . 1 To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain return authorization.
At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory.
Return freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
90662
MESH BACK MANAGER'S CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1) up.
To lower seat height sit on chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• 2-TO-1 SYNCHRO TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of
the tilting feature. Turn knob (4) clockwise to increase tension
and counter-clockwise to decrease or ease the tension. To lock
return chair to the three positions and push lever (2) in.
To unlock pull lever (2) out.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
• SEAT SLIDER ADJUSTMENT
To slide seat forward or backward, pull knob (3) out.
Push knob (3) in to lock desired seat position.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push buttom (5) to allow the arms to move
up or down freely. Release buttom (5) once the desired
4
height is reached.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.