Advertisement
Quick Links
Advertisement
Related Manuals for Environics 6202
Summary of Contents for Environics 6202
- Page 1 Model 6202 Reduced Oxygen Breathing Device 2 Simulator Accessory Package Operator’s Guide Revision 3 11 MAY 2018 Environics Inc. 69 Industrial Park Road East Tolland, CT 06084-2805 USA Phone (860) 872-1111 Fax (860) 870-9333 E-mail: INFO@ENVIRONICS.COM Web: HTTP://WWW.ENVIRONICS.COM...
- Page 2 30 days. LIMITATION OF WARRANTY This warranty does not apply to equipment gathered and tested by Environics that is covered under the manufacturer’s warranty. This will include all computers, monitors, flight control simulator hardware and software, communications equipment, breathing masks and all associated equipment manufactured outside of Environics.
-
Page 3: Table Of Contents
TABLE OF CONTENTS LIST OF INCLUDED EQUIPMENT OVERVIEW UNPACKING AND ORIENTATION SYSTEM SETUP MASK FITTING MASK ACCESSORRIES INTERCOM AUDIO CONNECTIONS SYSTEM PICTURES... -
Page 4: List Of Included Equipment
LIST OF INCLUDED EQUIPMENT Laptop computer with neoprene storage case 19" monitor (size is for portability, larger monitors available at an additional charge) X-Plane software Joystick - throttle package 4 place stereo intercom Instructor headset with microphone Student headphones (2) Oxygen masks* (1 large, 1 medium) with microphones and amplifiers extended and customized to mate with the ROBD2 and the intercom. -
Page 5: Overview
OVERVIEW The second generation Reduced Oxygen Breathing Device (ROBD2) is a computerized gas-blending instrument. The system mixes air and nitrogen to produce the sea level equivalent atmospheric oxygen contents for altitudes up to 34,000 feet. The ROBD2 will make the operator hypoxic and the simulation equipment allows the instructor to make an accurate assessment of the subject under test (SUT) ability to perform flight related tasks under the stress created by reduced oxygen. -
Page 6: Unpacking And Orientation
UNPACKING AND ORIENTATION Transport case unpacking 1. The transport case is provided with the ability to be locked. If a lock has been added, remove the lock and activate the press to release latches. 2. Remove the equipment from the boxes and read any important instructions or notes found within. -
Page 7: System Setup
SYSTEM SETUP Computer 1. LAPTOP - The X-plane software is preinstalled on the laptop. It is ready to plug in and power up. 2. MONITOR - Connect the video cable directly to the external monitor port on the laptop and plug the power in. 3. - Page 8 Communications 1. INTERCOM – The pilot PA-400ST controls the routing of audio signals. It operates on two 9 volt batteries (included) and is used to control squelch and individual volumes for the Subject Under Test (pilot) and the Instructor (Co-Pilot). See the intercom audio connections section for specific connection instructions.
-
Page 9: Mask Fitting
MASK FITTING 1. The mask attaches to the head net with quick release connectors. The connectors have been color coded for ease of use. 2. The straps on the head net are adjustable to tighten the mask and lock with a Velcro tab. 3. - Page 10 SIMULATOR ACCESSORY PACKAGE OPERATOR’S GUIDE MAY 2018...
-
Page 11: Mask Accessorries
ROBD2 and intercom. If the mask is included with the simulator accessory package the following items are attached at Environics and the mask is ready for use. 1. Extended breathing tube, ROBD2 connector and breathing tube union fitting. -
Page 12: Intercom Audio Connections
INTERCOM AUDIO CONNECTIONS SUT MASK LAPTOP MICROPHONE AUDIO OUT OUTPUT EXTERNAL INSTRUCTOR HEADPHONES SPEAKERS HEADSET SIMULATOR ACCESSORY PACKAGE OPERATOR’S GUIDE MAY 2018... -
Page 13: System Pictures
SYSTEM PICTURES SIMULATOR ACCESSORY PACKAGE OPERATOR’S GUIDE MAY 2018...
Need help?
Do you have a question about the 6202 and is the answer not in the manual?
Questions and answers