Sinclair SBG-01 User Manual page 3

Bacnet gateway
Table of Contents

Advertisement

Dear customer:
Please read this manual carefully prior to installation and operation and strictly
observe all installation and operation instructions covered in the manual.
Special attentions shall be paid to the following marks:
WARNING!
CAUTION!
(1)
Installation shall be performed by the qualified personnel; otherwise it would
result in a fire hazard or electric shock.
(2)
Do not place the plug of the power supply into the socket before it is dried and
cleaned.
(3)
Cut off the power supply before touching the electric element.
(4)
Do not touch this device with wet hands; otherwise it would result in electric
shock.
(5)
Do use the power cable specified in this manual; otherwise it would result in a
fire hazard.
(6)
When the power cable is reversely connected or the power supply is beyond
the rated range, it would result in a fire hazard or even damages to this device.
(7)
For PLUGGABLE EQUIPMENT,the socket-outlet shall be installed near the
equipment and shall be easily accessible.
(8)
Do install this device inside the electric control cabinet which is located indoor
and then is locked.
(9)
Do install this device where it will not be subject to the electromagnetic
interference or heavy dust.
User Notice
This mark indicates operation, which if improperly performed,
might lead to the death or serious injury of the users.
This mark indicates operation, which if improperly performed,
might possibly result in damage to the device.
WARNING!

Advertisement

Table of Contents
loading

Table of Contents