Advertisement
Connecting Your Keyboard
Connecting Your Keyboard
1. Plug the USB connector of the USB Keyboard to one of the
USB ports on the computer.
2. "Add New Hardware Wizard" will pop up with the following
messages : This wizard searches for new drivers for: USB
Composite Device.
3. At the bottom of this screen click on the "Next" button.
4. On the next "Add New Hardware Wizard" screen , you will
be asked : What do you want windows to do?
5. Select "Search for the best driver for your device
(recommended)" then click on "Next" again.
6. The next "Add New Hardware Wizard" gives you this
message : Windows will search for new drivers in its
driver database on your hard drive and in any of the
following locations.
7. Put a check on the box where it says "CD-ROM drive".
8. Click "Next" to start the search.
9. Insert the Win98 CD-ROM on your CD-ROM drive then click
the "Next" button.
10. On the next screen you will get the following messages :
Windows driver file search for the device: USB Human
Interface Device.
11. Windows is now ready to install the best driver for this
device. Click "Back" to search for a different driver, or click
"Next" to continue.
2
Advertisement
