Belkin F7D3302 User Manual page 29

TROUbleSHOOTInG, SUPPORT, anD WaRRanTY
a disk I plugged into the USb port is not showing
up on my computer or in Memory Safe .
1 . Is the light on over the USB port that the disk is plugged into?
If not, try unplugging and re-plugging the disk . Please check
that the USB connector is firmly plugged into the Router .
2 . If your disk has an optional power supply, please use
it while the disk is attached to your Router .
3 . The Router supports FAT16, FAT32-, or NTFS-formatted
disks . Disks in other formats will not appear in the
Finder (Mac OS X) or Windows Internet Explorer .
a printer I plugged into the USb port is
not showing up on my computer .
1 . Is the light on over the USB port that the printer is plugged into?
If not, try unplugging and re-plugging the printer . Please check
that the USB connector is firmly plugged into the Router .
2 . To print to a printer attached to the Router, your
computer must have that printer's driver installed .
Please check that the driver is installed .
3 . The printer may not be set to auto-connect . Via the Belkin Router
Manager, open the USB Print and Storage Center . Check that the
printer appears in the list of available devices . View the properties
of the printer, and check that "auto-connect" is selected .
27