Table of Contents
Advertisement
Troubleshooting Guide
Problem
Gate battery low
Obstruction to line
of sight
Power level too low
Start/Finish gate not
set to zero
Missed
Timing
Telemetry not
configured properly
Sensor pointed
directly at the sun
Power level too high
Timing gate pointed
Picking up
across track
timing when it
shouldn't
Sensor pointed
directly at the sun
Possible
Cause
Solution
Charge battery
Ensure clear line of site between
gate and sensor
Turn power level up
Set Start/Finish gate as zero for
gate number
Ensure Lap counter or RPM
input options are set correctly to
match your telemetry system. See
Connecting the SPMLTT2500
Avoid configuring the track so
the sensor is pointed directly into
the sun
Turn power level down
Place timing gate on outside
section of track
Avoid configuring the track so
the sensor is pointed directly into
the sun
EN
11
Advertisement
Table of Contents
