Table of Contents
Advertisement
6.
Maintenance and Safety Inspection
1)
After using of the probe and the magnetic sensor attachment,
they should be cleaned and disinfected or sterilized according
to "5. Reprocessing Procedure", then store the probe and the
magnetic sensor attachment in a cool and dark space to avoid
high temperature, humidity and direct sunlight.
2)
Visually inspect the surface of the probe head, the housing,
the cable and the connector for any crack, scratch or
denaturalization. If you find any damage, do not use the probe,
and immediately contact a service support.
3)
Visually inspect the surface of the magnetic sensor attachment
for any crack, deformation or denaturalization. If you find
any damage, do not use the magnetic sensor attachment, and
immediately contact a service support.
-23-
Q1E-EP1359
Advertisement
Table of Contents
