Option Of C42 Probe; Magnetic Sensor - Hitachi C42 Instruction Manual

4.

Option of C42 Probe

4.1

Magnetic sensor

4.1.1 How to attach the Magnetic sensor
The procedure of attaching the magnetic sensor is as follow.
1) Confirm that the probe and magnetic sensor attachment are
cleaned, disinfected or sterilized.
2) Connect the probe, operate the ultrasound diagnostic scanner,
and adjust the image according to the instructions given in
the operation manual for the ultrasound diagnostic scanner.
3)
To
magnetic sensor as shown below.
a) The magnetic sensor attachment is available in two different types
whether it is used with the needle guide bracket or not. Select on
of the following attachment.
When not using the Needle guide bracket
"☆EUP-C532" indication
Fig. 3 Selection of the Magnetic sensor attachment
use Real-time Virtual Sonography(RVS),
When using the Needle guide bracket
"☆EUP-C532+GUIDE" indication
-8-
attach the
Q1E-EP1359