Download Print this page

Olympus BL-AC10DS-A2 User Manual

Micro cantilevers

Advertisement

Quick Links

Thank you for purchasing OLYMPUS Micro cantilevers.
Please read this manual carefully before use.
<Explanation of the part of the products>
Cantilever chips in a plastic case are included in the envelope with manual and spec sheet.
Label
Envelope for transportation
Cantilever chips are contained in the plastic case (Tac carrier)
Case (Tac carrier)
Case Label
Tape
Case (closed)
Case label
Product name
Lot Number
BL-AC10DS-A2
(MHz)
1.5
(N/m)
0.1
Inspection stamp
user's manual
Manual and Specification sheet
Plastic pack (translucent blue)
Plastic case
(Cantilever chips are in the case)
Adhesive sheet
Cantilever chips
Upside
Down side
Cantilevers are tip-side-up
as viewed in the case.
Case (open)
Magnified illust.
Cantilever chip
Cantilever
(substrate)
One cantilever elongates from the side
of round shoulders of the chip.
- -
- 1e -
Please obey the following to the OLYMPUS micro cantilevers
Warning
 Use protective eye glasses when handling to avoid damage
to the eyes from breakage of the cantilever chips.
Caution
 Please handle our cantilevers carefully because they are fragile.
Caution
 Do not drop or shake the cantilever case. Even when the cantilever
chips are contained in the cantilever case, the cantilevers may break if
the case is handled roughly or jarred.
Caution
 It is recommended that precautions be taken to prevent damage to the
cantilever tips from electrostatic discharge.
Caution
 When discarding, please obey the laws and regulations in your country
and/or your company. These cantilevers are made of silicon nitride and
gold/chromium.
- 2e -

Advertisement

loading

Summary of Contents for Olympus BL-AC10DS-A2

  • Page 1 Please obey the following to the OLYMPUS micro cantilevers user’s manual Warning Thank you for purchasing OLYMPUS Micro cantilevers. Please read this manual carefully before use.  Use protective eye glasses when handling to avoid damage to the eyes from breakage of the cantilever chips.
  • Page 2 The chips can be attached to the AFM instrument as soon as the case is open. Open the case Caution See the specification sheet of OLYMPUS Micro cantilevers at the last page of this manual. Table of contents page Preparation ...
  • Page 3 Attaching the cantilever chips to your instrument 3) In opening the case, put the plastic case label-side down on a desk. The cantilevers are tip-side-up as viewed in the case. 1) Please read the instruction manual of your scanning probe microscope before this operation. 4) Open the case.
  • Page 4 AFM system to avoid any contact of a chip shoulder and the sample surface. It is strongly recommended that both of Please access to the web page of OLYMPUS micro cantilevers. bottom-side surface of the chip and chip holder be kept clean and particle-free. A contamination particle between them might tilt the chip to contact them each other.