Sony STR-DA3300ES Service Manual page 10

STR-DA3300ES/DG1100
Name
Remote commander
G MUSIC
You can use the supplied remote RM-AAL011
H MOVIE
to operate the receiver and to control the Sony
I Numeric
audio/video components that the remote is
buttons
assigned to operate.
RM-AAL011
J ENTER
MEMORY
K AMP MENU Press to display the menu to
L
V/v/B/b
M OPTIONS
TOOLS
N MENU
SCREEN/
DSPL
CONTROL
O CATEGORY
+/–
a)
P m/M
a)
x
a)
X
a) b)
H
./>
Name Function
A AV ?/1 (on/
Press to turn on or off the audio/
CATEGORY
standby) video components that the
MODE
remote is assigned to operate.
If you press the ?/1 (B) at the
TUNING +/– Press to select station.
same time, it will turn off the
Q PRESET
receiver and other Sony
b)
+ /–
components (SYSTEM
STANDBY).
TV CH +/–
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
R F1/F2
button (C).
B ?/1 (on/ Press to turn the receiver on or
standby)
off.
If ZONE 2 is selected, only the
main receiver is turned on or off
with this button. To turn off all
components including an
amplifier in zone 2, press ?/1
and AV ?/1 (A) at the same
time (SYSTEM STANDBY).
C Input
Press one of the buttons to MACRO1,
buttons select the component you want
MACRO2
to use. Press a pink-labeled
button after pressing SHIFT
TV/INPUT
(wk). When you press any of the
input buttons, the receiver turns
on. The buttons are factory
assigned to control Sony
components. You can program WIDE
the remote to control non-Sony
components following the steps
RESOLUTION Press SHIFT (wk) then press
in "Programming the remote".
D ZONE 2
Press to enable the zone 2
operation.
E TEST TONE Press to output the test tone
from each speaker.
F AMP Press to enable the receiver
operation.
STR-DA3300ES/DG1100
Function Name Function
S DVD/
Press to display the menus of
Press to select sound field.
TOP MENU, the DVD player on the TV
Press to select sound field.
MENU screen. Then use V/v/B/b and
to perform a menu
Press to
operations.
– preset/tune to preset stations.
– select track numbers of the
NIGHT
Press AMP (6), then press
CD player, DVD player, Blu-
MODE NIGHT MODE to activate the
ray Disc Player or MD deck.
NIGHT MODE function.
Press 0/10 to select track
INPUT Press AMP (6), then press
number 10.
MODE INPUT MODE to select the
– select channel numbers of
input mode when the same
the VCR or satellite tuner.
components are connected to
– After pressing TV (e;),
both digital and analog jacks.
press the numeric buttons to
select the TV channels.
T MUTING
Press to turn off the sound
temporarily. Press the button
Press to enter the value after
selecting a channel, disc or again to restore the sound.
track using the numeric buttons.
U MASTER Press to adjust the volume level
VOL +/–
Press to store a station during of all speakers at the same time.
tuner operation.
TV VOL +/– Press TV (e;), then press TV
VOL +/– to adjust the volume
operate the receiver. level of the TV.
V DISC SKIP Press to skip a disc when using
Press V/v/B/b to select the
menu items. Then press to a multi-disc changer.
enter the selection.
W RETURN/ Press to return to the previous
EXIT O menu or exit the menu while the
Press to display and select items
menu or on-screen guide of the
from option menus for receiver
VCR, DVD player, or satellite
and DVD player, Blu-ray Disc
tuner is displayed on the TV
Player.
screen.
Press to display and select items
X DISPLAY
Press to select information
from the option menus for DVD
displayed in the display
player or Blu-ray Disc Player,
window, TV screen of the VCR,
etc.
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
Press to display the menu to
MD deck.
operate the audio/video
Note
components.
In the SCREEN mode, press the
Press SHIFT (wk), then press
button to display the menu on
MENU to switch the display
the TV screen.
mode of the menu between
Y CLEAR
Press to
SCREEN (to display the menu
– clear a mistake when you
on the TV screen) and DSPL (to
press the incorrect numeric
display the menu in the display
button.
window).
– return to continuous
Press to select the category for
playback, etc. of the satellite
satellite tuner.
tuner or DVD player.
Press to operate the DVD
>10 Press to select
player, Blu-ray Disc Player, CD
– track numbers over 10 of the
player, MD deck, tape deck, or
VCR, satellite tuner, CD
component connected to the
player or MD deck.
a)
DIGITAL MEDIA PORT
– channel numbers of the
adapter etc.
Digital CATV terminal.
Press to select the category
D.TUNING
Press to enter direct tuning
mode for satellite tuner.
mode.
Z 2CH/ Press to select sound field or to
Press to register FM/AM/
A.DIRECT switch the audio
satellite tuner stations or to of the selected input to analog
select preset stations. signal without any adjustment.
Press TV (e;), then press TV wj A.F.D. Press to select sound field.
CH +/– to operate the TV,
wk SHIFT Press to light up the button. It
satellite tuner, VCR, etc.
changes the remote button
Press TV (e;), then press F1 or
function to activate the buttons
F2 to select a component to
with pink printing.
operate.
wl SLEEP Press to activate the sleep timer
• HDD recorder
function and the duration which
F1: HDD
the receiver turns off
F2: DVD player, Blu-ray Disc
automatically.
Player
• DVD/VHS combo player
e; TV
Press to enable the TV
F1: DVD player, Blu-ray Disc
operation.
Player
ea RM SET UP Press to set up the remote.
F2: VHS
a)
Press AMP (6), then press See the table for information on the buttons that
MACRO1 or MACRO2 to set
you can use to control each component.
up the macro function.
b)
The tactile dot is attached to these buttons (H,
Press TV/INPUT and TV (e;)
PRESET+). Use as a mark of operation.
at the same time to select the
input signal (TV input or video
Notes
input).
• Some functions explained in this section may not
Press repeatedly to select the
work depending on the model.
wide picture mode.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
RESOLUTION repeatedly to component, the above operation may not be
change the resolution of signals possible or may operate differently than described.
output from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack.
RM-AAU018
This remote can only be used to operate the
receiver. You can control the main functions of
the receiver with simple operations using this
remote.
Name Function
A ?/1 (on/
Press to turn a receiver on or off.
standby)
B 2CH/
Press to select sound field.
A.DIRECT
A.F.D.
MOVIE
MUSIC
C SCREEN/
Press to switch the display
DSPL mode of the menu between
CONTROL SCREEN (to display the menu
on the TV screen) and DSPL (to
display the menu in the display
window).
D
After pressing SCREEN/DSPL
CONTROL (3), press V/v/B/
b to select the menu items.
V/v/B/b
Then press to enter the
selection.
E OPTIONS
Press to display and select items
from option menus.
F MENU
Press to display the menu to
operate the receiver.
G DMPORT
Press to operate component
connected to the DIGITAL
MEDIA PORT adapter.
N Starts play.
x Stops play.
./> Skips tracks.
10 10
Name Function
H INPUT
Press to select the input source
SELECTOR to play back.
I MASTER
Press to adjust the volume level.
VOLUME +/–
J MUTING
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
K RETURN/
Press to return to the previous
EXIT menu or exit the menu.
L DISPLAY
Press to select information
displayed in the display
window.
Note
In the SCREEN mode, press the
button to display the menu on
the TV screen.
M SLEEP
Press to activate the sleep timer
function and the duration which
the receiver turns off
automatically.