Before Operation; Installing The Battery Pack - Toro Flex-Force Power System 21466 Operator's Manual

Operation

Before Operation

Installing the Battery Pack

Important:
Use the battery pack only in temperatures that are within the appropriate range; refer
to Specifications (page
1. Make sure that the vents on the battery are clear of any dust and debris.
2. Lift up the battery-compartment lid (A of
3. Line up the cavity in the battery pack with the tongue on the machine and slide the battery pack into the
compartment until it locks into place (B of
4. Close the battery-compartment lid (C of
Note:
If the battery-compartment lid does not close completely, the battery is not fully installed.
11).
Figure
Figure
8).
Figure 8).
8).
Figure 8
12
g251221