Gartenland EasyMow 1200 Manual page 33

Startup
The robotic lawn mower must remain
stopped when it moves into the base sta-
tion. If the robotic lawn mower does not
meet the contacts when it moves into the
base station, it will move further along
the boundary cable until it meets the con-
tacts or the procedure is cancelled.
Display after the calibration movement
The mowing window preset at the factory is dis-
played after calibration.
The mowing program is active, the battery is
charged.
After calibration has been completed, the robo-
tic lawn mower can be used for mowing with
the factory-set mowing times without further pro-
gramming.
The following mowing times are factory-set: Mon
- Fri: 07:00 - 10:00 and Mon - Fri: 17:00 - 19:00.
Observe local ordinances regarding opera-
ting times.
Overview of main menu
The following menu items can be selected:
456776_a
Programs
Settings
Main
menu
Information
Press menu key [3-8] to open the main menu.
Select the required program item with the [ar-
row keys] (3-3) and confirm with the [multi-
function key right] (3-5).
Each menu can be exited using the menu
keys [3-8].
Program menu
Make the settings in the week program.
Look at the program info, e.g. mowing pro-
gram.
Setting the week program
[ Week program ]
*All days [X]
Monday [X]
Back
Week program
Entry points
Program info
Time
Date
Language
PIN code
Button tones
Rain sensor
Edge mowing
Display contrast
Recalibrate
Factory settings
Blade service
Hardware
Software
Program info
Faults
Change
33