Belkin OmniView F1DA104Pea User Manual page 14

Installation
Connect the Computer:
1. Using an OmniView KVM Cable (Belkin part# F3X1105b-XX, plug in the
male VGA connector to the VGA port on the computer. Connect the
other end (the female connector) of the VGA cable to the back of the
PRO2 PS/2 labeled "VGA 01".
2. Connect the PS/2 keyboard and PS/2 mouse connectors of the cable
to the keyboard and mouse ports on the computer. Connect the other
ends of the cables to the keyboard and mouse ports located directly
underneath VGA 01 on the PRO2 PS/2 (Belkin part # F3X1105b-XX).
3. Repeat steps 1 and
2 for each additional
PS/2 computer you
wish to connect.
� � � � � � � � � � � � � � � � � � � � � � � � �
� � � � � � � �
11
� � � � � � � � � � � � � � �
� � � � �
� � � �
� � � �
1
2 2
3
4
5
6
7
8
9
10