Table of Contents
Advertisement
Should the appliance become damaged, do not use it and have it repaired by
a professional. Do not disassemble the appliance or try repairing it yourself. In
case of questions or problems turn to our customer service.
Before first Use
Remove the electric kettle from the packaging and check it for any damage in
transit.
Dispose of any non-reusable packaging material properly or store it in a safe
location out of reach of children.
Clean all parts of the electric kettle before using the first time as described
below (chapter "Cleaning and Storing").
Assembling and using the Water Kettle
1. Place the base (7) on a solid, level surface. Slide the power cord through the
cord opening.
2. Only connect the base to a properly installed, earthed mains socket with
protective connection.
3. Fill the electric kettle with water. Do not overfill. Do not exceed the MAX mark
on the water level indicator (4) of the kettle.
4. Place the electric kettle on the base (7) and closed the lid (3).
5. Press down the switch (6), to switch on the electric kettle. Do not use force on
the switch.
The power indicator (8) turns on. Keep the lid (3) closed at all times during
use.
Before using the electric kettle for the first time, fresh water should be boiled in
it twice for cleaning. Do not use any additives or detergents.
After boiling, the device automatically switches off.
If you want to stop the boiling process, lift up the switch (6) or just remove the
kettle from the base.
6. Keep the lid (3) closed when pouring water. There is risk of injury!
Disconnect the base from mains power if you do not use the water kettle for a
longer period of time, when cleaning or moving it or if any malfunctions occur.
Operating
6
Advertisement
Table of Contents
