Summary of Contents for Jameco Electronics HDMI Switch
Page 1
Distributed by: www.Jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Jameco Part Number 1944724...
Page 4
HDMI Switch User’s Manual Safety Instructions Always read the safety instructions carefully: Keep this User’s Manual for future reference Keep this equipment away from humidity If any of the following situation arises, get the equipment checked by a service technician: •...
1. Introduction 1. Introduction This HDMI Switch allows up to four HDMI sources, such as DVD player, DTV set-top-box, game station or HDIM computer, to share a single high definition display. It is perfect for home theater system with multiple HDMI devices as well as for commercial showcase.
2. Connections and Usage 2. Connections and Usage 1. Connect the provided power supply to the DC connector on the switch and a power outlet. 2. Connect an HDMI cable from the HDMI OUT to an HDMI display. (Be sure the display is powered off when you make the connection.) 3.
Page 9
Notice on Using the Switch Powering On/Off The power switch on the HDMI switch is used to turn on/off the main power of the switch. Switching to “I” turns on the switch while “O” turns it off. Please turn off the main power if the HDMI switch will not be used for a long period of time.
Page 10
2. Connections and Usage Switching Between the Input Sources Users might experience a slight delay to the video display upon switching the input sources. This occurs because the input and output devices need time to negotiate with each other. The delay time varies according to each brand of the devices you are connecting.
4. Regulatory Compliance 4. Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received.