Advertisement
Available languages
Available languages
4.
Press the mode button (B) to return to displaying the time.
Alarm
Functions
Press the mode button (B) one or more times until the
display shows the time. Keep the split time/reset button (A)
pressed to go to alarm setting mode. The time display must
be enabled to set the alarm. Keep the split time/reset button
(A) pressed and press the start/stop button (C) to enable/
disable the alarm. When the alarm is enabled the symbol is
shown in the right corner of the display.
Settings
In time mode, press the mode button (B) two times. The
values for time and weekday start flashing to show that the
product is in alarm setting mode. Increase the setting by
pressing the start/stop button (C) several times, or keep the
button pressed to increase rapidly. Press the split time/reset
button (A) to switch to setting the hour and minutes. Press
the mode button (B) to leave alarm setting mode and return
to displaying the time.
Hour signal
In time mode, keep the split time/reset button pressed
and press the mode button (B). Enable the hour signal by
pressing the mode button (B). The hour signal is enabled
when all the weekdays are shown and disabled when all the
weekdays are blank.
FIG.
3
Advertisement
