Advertisement
4. OPERATING THE GENERATOR
1. Warm up the engine without load for 3 minutes.
2. This generator is equipped with low oil warning system. The engine will stop automatically in case
of low oil pressure or lubrication oil shortage. The engine will not start without lubrication oil refill.
Check the oil level and refill.
3. For a single cylinder generator, do not loosen or readjust either the engine speed limiting bolt
or fuel injection limiting bolt (They are already well adjusted before leaving factory), otherwise
performance may be affected.
4. For v-twin engine generator, set up speed handle to high speed after warm up.
Things to check during operation:
1. Any abnormal sounds or vibration.
2. The engine misfiring or running rough.
3. What about the color of the exhaust gas?
(Is it black or too white?). If you notice any situation mentioned above, Please Contact our service
center.
Load
To add load according to specified parameter.
17
Advertisement
