Advertisement
4
step
PARTS USED:
5
step
PARTS USED:
*
CLEANING INSTRUCTIONS
Prolong the life of your Prevue cage
with these recommendations:
→ When cleaning the cage and parts,
use a soft cloth or Teflon-resistant
scrubber (such as Prevue's Cage Saver
non-abrasive scrub pad (#109)).
→ Wash all parts with warm water
and a mild environmentally-friendly,
pet-friendly soap.
→ Rinse thoroughly.
→ Hand dry all parts completely
with a soft dry cotton cloth before
reassembling the cage.
→ Do not leave plastic parts to dry
in the sun as they may warp.
1804 TR — 10 / 14— A4
Install the roof, starting
with the middle arch.
There are two loops on
each bottom rail of
the arched roof unit.
There is one loop at the
peak of the body mesh,
in front and back.
Flex the arched roof
so that the lower loops
catch underneath the
short vertical panels on
the cage body.
Catch the arched roof
at the top onto the loops
of the cage body, front
and back.
Finish by installing the
two peaked roofs.
There are two loops on
each top inside and
outside rail of the cage
body.
For each peaked roof
unit, hook the second
horizontal wire onto
the loops of the cage
mesh—start with
inside loops first, then
move to outside loops.
Made in China for Prevue Pet Products, Inc., Chicago IL USA
www.prevuepet.com
800 243-3624
@
customerservice
prevuepet.com
Advertisement
