Ir Sensor; Batteries - Philips OLED706 Series User Manual

1 -  - EXIT
To switch back to watch TV or to stop an interactive
TV application.
2 -  Volume
Prese + or - to adjust the volume level.
3 - Number keys
To select a channel directly.
4 - TEXT
To open or close Text/Teletext.
5 -  Channel
Prese + or - to switch to the next or previous channel
in the channel list. To open the next or previous page
in Text/Teletext.
6 -  Mute
To mute the sound or to restore it.
7 -  OPTIONS
To open or close the options menu.
Bottom (for UK models)
1 -  - EXIT
To switch back to watch TV or to stop an interactive
TV application.
2 -  Volume
Prese + or - to adjust the volume level.
3 - Number keys
To select a channel directly.
4 -  Channel list
To open the channel list.
5 -  Channel
Prese + or - to switch to the next or previous channel
in the channel list. To open the next or previous page
in Text/Teletext.
6 -  Mute
To mute the sound or to restore it.
7 -  OPTIONS
To open or close the options menu.
3.2

IR Sensor

The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
 Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.
3.3

Batteries

If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the back-bottom of the remote
control.
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2 Alkaline, type
AAA-LR03-1.5V batteries. Make sure the  and the
 ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.
Remove the batteries if you are not using the remote
10