Page 2
Thank you for purchasing this infrared heater. We hope you will be completely satisfied with this product. To ensure this, please read these instructions carefully before use and keep them in a safe place. Part Description Heating Element Assembly Knob Body Position Indication Plate 0=Off...
Page 3
- Before cleaning it. ■ Never operate your appliance if it has fallen over. ■ Never dismantle your appliance. An incorrectly repaired appliance maybe dangerous to the user. If you encounter any problems, please take it to one of the Approved Service Centers in our customer service network ■...
HOW TO ASSEMBLE ■ Before installing your appliance, you must disconnect the electrical supply at the circuit breaker. FREE STANDING 1> Insert the lower post assembly Clamp (11) into the base assembly (16) and then fix it tightly by means of 4-M6X30 screw, and insert Lower Post Assembly 4-M6 X 24 Screw...
5>. According to the request of use angle, Heating Element Assembly Heating Element Assembly can adjust Angle at 0º~45º. (Fig.5) Body WALL MOUNTED 1.Take out the black screw from control panel box,then fixed with the body with that black screw tightly. 2.To mounting in the wall to use the 4 screws (package in sperate).