ADE FITVIGO BPM 1600 Operating Instructions Manual page 33

Start measurement
Inflation of the cuff results in a short constriction of the wrist. This can
feel a little unpleasant, but is generally absolutely safe. The measurement
process takes only a short while.
1. To start the measurement, press the START/STOP button.
If you have paired the blood pressure monitor to the app, the measured data will
then be transferred to the FITvigo app via
2. Remove the cuff once it has been automatically deflated.
3. To turn off the blood pressure monitor, press the START/STOP button. Otherwise,
the device will turn off automatically in a minute.
Information on the measurement results can be found in the chapter
"General Information on Blood Pressure".
Blood pressure monitor/Wrist BPM 1600
The cuff is filled with air; shortly thereafter the
pulse rate will be displayed.
The measurement result will be displayed a
few seconds later.
Bluetooth®
, see next chapter.
Measuring Blood Pressure
33