Behringer SLOW MOTION SM200 User Manual

Thank you for showing your confidence in us by purchasing the BEHRINGER SLOW
MOTION SM200. This effects pedal makes your guitar sound like a violin and lets you
experience real cool 80's effects!
The SENS control adjusts the sensitivity at which picking strength the effect is
activated. Low SENS settings are not suitable for slow harmony changes, but
good for rapid staccato lines.
The ATTACK control determines how fast the effect swells the volume of the input
signal.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove
the pedal cover. Be careful not to scratch the unit.
The SM200 has no on/off switch. As soon as you insert the plug into the IN
connector, the SM200 is on. When not in use, remove the plug from the IN
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the underside.
SLOW MOTION SM200
1. CONTROLS
Top view