Cree NTF Series Installation Instructions

When using electrical equipment, basic safety precautions should always be followed including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

1. DANGER- Risk of shock- Disconnect power before installation.
DANGER – Risque de choc – Couper l'alimentation avant l'installation.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

TO INSTALL:

1
Small Flood

INSTALLATION

STEP 1:

Remove the (4) Phillips head screws on the back of the luminaire and discard screws. See Figure 1.

STEP 2:

Place the visor onto the back of the luminaire, aligning the screws included with the visor accessory with the holes in the luminaire. Tighten screws to
20 in-lbs (2.2 N·m)
© 2019 Cree, Inc. All rights reserved. For informational purposes only. Content is subject to change.
See http://lighting.cree.com/warranty for warranty and specifications. Cree
Cree, Inc.
1 of 1

IMPORTANT SAFEGUARDS

and the Cree Logo are registered trademarks of
®
NTF Series
LED Flood Lights
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
Large Flood
LPN00638X0001A0_A
Visor
lighting.cree.com