EHEIM PCPS Manual page 11

Montage
✗

Screw in the hose connection pieces for the pump inlet and out-
let (not included).
CAUTION:
Use G 1/4˝ connection as specified in DIN ISO 228-1 with soft
chambered seals only. Check the seals for correct fit and for
signs of damage.
Mount the mounting plate
the motor body according to the installation position as per draw-
ing (A) and screw it onto the computer housing (screws not in-
cluded).
CAUTION:
Attach the pump so that the tank lid
as per drawing (A).
Connect the circulating pump with flexible hoses from the cool-
ing system. Pay attention to the inlet and outlet.
CAUTION:
Ensure that the flexible hoses fit correctly and do not leak.
CAUTION:
Switch off the computer
before opening it and dis-
connect all plugs from the
mains.
by pushing it onto a groove in
faces vertically upwards