Bosch Buderus Logamatic 5000 Series Manualline page 18

User Documentation 18|33
Logamatic 5311/Control 8311" or "Service manual for the specialist - Logamatic
5313/Control 8313".
Figure 2-6: Overview network with Logamatic 5000 and Logaflow HSM plus
For the connection between Logamatic 5000 and Logaflow HSM plus the positions
Slave10 to Slave 15 are provided. Up to six HSM plus BSM can be connected to
one Logamatic 5000/Control 8000 (master). Each HSM plus BSM can be used as a
segment substation. Thus, up to eight additional HSM plus devices can be con-
nected to each HSM plus BSM.
Figure 2-7: Sample Installation of a Network
Note:
Another controller of the Logamatic 5000/Control 8000 controller series is always
integrated as a substation (slave). Use as a segment substation is not possible (see
Figure 2 7).
Example:
© All rights with Robert Bosch GmbH, also for the case of protected rights applications
EN_User_documentation_Instructions_for_controlling_the_Logamatic_5000_controller_series_via_Modbus_TCP_I
P_20210203.docx | 10.02.2021