Related Manuals for ARAG EXPLORER
Summary of Contents for ARAG EXPLORER
- Page 1 MULTI-FUNCTION JOYSTICK 46701802 Software rel. 2.3.X INSTALLATION, USE AND MAINTENANCE...
-
Page 2: Table Of Contents
This manual is an integral part of the equipment to which it refers and must accompany the equipment in case of sale or change of ownership. Keep it for any future reference; ARAG reserves the right to modify product specifications and instructions at any moment and without notice. -
Page 3: Risks And Protections Before Assembly
INTENDED USE EXPLORER is a multi-function joystick that, suitably configured by the computer in your possession, allows you to manage the main functions of a crop sprayer (spraying and hydraulics) directly from the handgrip. This device is designed to work on agricultural machinery for spraying and crop spraying applications. -
Page 4: Overall Dimensions And Fastening
OVERALL DIMENSIONS AND FASTENING CLAMP FASTENING Ø 27 mm Fig. 3 THREAD FASTENING Fig. 2 Fig. 4... -
Page 5: Wiring Connections
• Use of unsuitable cables not provided by ARAG automatically voids the warranty. • ARAG is not liable for any damage to the equipment, persons or animals caused by failure to observe the above instructions. General precautions for a correct harness position •... -
Page 6: Using The Keys
Fig. 9 Quick function list consultation (long press P2) Allows viewing the page for assigning functions to the keys of the EXPLORER joystick. Press and hold the P2 button to access the assignment summary page directly. This page is read-only. -
Page 7: Switching On
SWITCHING ON • Starting the device First, LED (Fig. 10) indicates the operating mode of the device. 1 periodical blink of LED : start in A-NET mode. 2 periodical blinks of LED : start in ISOBUS mode. • Function test After start-up, the joystick performs a function test as follows: simultaneous switching on of all LEDs, backlighting of the keyboard and 1 long vibration. -
Page 8: Object Pool
OBJECT POOL Images and the relevant description texts contained in this manual are given as a reference as they can vary depending on the Virtual Terminal used. If the descriptions do not correspond to the text displayed in your Virtual Terminal, refer to the manual attached to the latter. -
Page 9: Functions Assignment
10.3.1 Automatically loading ARAG functions The EXPLORER joystick connected to an ARAG ECU allows the automatic implementation of the preset ARAG functions (“The functions described in this page cannot be changed.” on page 10. After the first configuration the Virtual Terminal may ask for the auxiliary joystick to be enabled. -
Page 10: Arag Default Functions
The following contents may NOT be updated and may differ from the product in your possession. To know the default ARAG assignments corresponding to your application, please refer to the relevant manual. The functions described in this page cannot be changed. -
Page 11: Key Map
10.3.4 Key map The KEY MAP below is useful to manually assign the functions to the joystick keys in Single mode "Main" page (P0) MAIN PAGE 1a PAGE 1b MAIN MAIN PAGE 2 MAIN The following page contains the mapping of the keys in Dual mode. CONTINUES >>>... - Page 12 The KEY MAP below is useful to manually assign the functions to the joystick keys in mode. Dual "Main" page (P0) MAIN PAGE 1a PAGE 1b MAIN MAIN PAGE 2 MAIN...
-
Page 13: Test Keys
10.4 Test keys T e s t k e y s Press the keys one at a time: if operation is correct, the Virtual Terminal display shows a tick sign. Fig. 27 10.5 Versions V e r s i o n s A p p l i c a t i o n I S O B U S s t a c k B S P... -
Page 14: Registration
The two modes are described in paragraph 10.3.2. Reset to Arag factory defaults - Allows restoring the device to factory default settings. R e s e t t o A r a g f a c t o r y d e f a u l t s... -
Page 15: Technical Data
Dispose of the system in compliance with the established legislation in the country of use. WARRANTY TERMS 1. ARAG s.r.l. guarantees this apparatus for a period of 360 days (1 year) from the date of sale to the client user (date of the goods delivery note). - Page 16 Only use genuine ARAG accessories or spare parts to make sure manufacturer guaranteed safety conditions are maintained in time. Always refer to the Internet address www.aragnet.com 42048 RUBIERA (Reggio Emilia) - ITALY Via Palladio, 5/A Tel. +39 0522 622011 Fax +39 0522 628944 http://www.aragnet.com...
Need help?
Do you have a question about the EXPLORER and is the answer not in the manual?
Questions and answers