Maintenance （ Vacuum Compartment - Hitachi R-SX700GPRU0 Instruction Manual

Maintainance (General Matter)
4 If any droplets remain on the surface of the parts that have been washed , wipe them.
5 Return all parts to their original locations.
6 Inspect and clean the power plug, cord and outlet.
Inspection
Are there any cuts in the cord?
■
■ Is the plug damaged or is the outlet
loose and heating up excessively?
● When there is a problem with
the power cord, plug, or outlet,
please consult the retailer or the service center.
How to Maintain Your Refrigerator
Plug the power cord into the outlet.
■ Insert the power plug into the outlet securely, all the way to the end with the power cord facing downward.
● Even if the power plug is plugged in immediately after being unplugged, the compressor will not run for 5 minutes.
NOTICE
However, if the inside is not cold, it will start running in approximately 30 seconds.
The evaporating tray for defrosting of this refrigerator does not need to be cleaned.
●
● Do not use the following : An alkaline or weak alkaline kitchen detergent, scouring powder, soap, petroleum, boiling wate
CAUTION
scouring pads, acid, benzine, alcohol, or bleach (for details, see the Caution on the detergent package).
● When any cooking oil, citrus fruit juice, or juice from any food pours on this refrigerator, wipe it off.
● When using a chemical rag, be sure to heed the warnings for rag use.
■ The doors, painted surfaces, and plastic parts may be scratched, or discolored by the chemical rag.
Maintainance (Vacuum compartment for 3 Door Model)
Pull the vacuum box out
1
In order to take the products stored in vacuum
box , pull the vacuum box out.
For the following part, clean it with a piece of
2
cloth soaked in warm water.
Aluminum tray
Vaccum box Case
Assembly of Vacuum Box Case
3
Take the Vacuum box to insert the vacuum compartment.
And push the handle down to lock
CAUTION
If the detergent or any product other than warm water is used for
cleaning Vacuum Box Gasket, there maybe effects in terms of
deformation, color change or loss vacuum property.
If Vacuum Box Gasket is dropping or Vacuum Box Door
not well aligned, there may be the loss of vacuum property.
Vacuum box gasket
Gasket receiver
Refrigerator Care
■ If the power plug is plugged in
with dust on the power cord, it
can result in fire.
● Remove all dust once a year
and wipe with a dry cloth.
When Vacuum Box Gasket is dirty.
Disassembly of Vacuum Box Gasket out off
1
Vacuum Box Case.Facing the Vacuum Box,twist the knob
of the Vacuum Box Gasket on top right and carefully remove.
Knob
Wipe gently with sponge on the stain
2
with plain water. Don't use any detergent.
Vacuum box gasket
Please clean Packing track also.
Wipe water out with dry cloth and leave
3
the part until it is naturally dried.
Assemble Vacuum Box Gasket, twist
4
the knob to align with the packing track,
deliberately assemble.
Knob
r,
Onece a month
Gasket track
Gasket track
23