Siemens HB 24 Series Instructions For Use Manual page 45

Electronic clock with cooking-
time and finishing-time setting
Setting the time on
the clock
In order to set the correct time of day on the clock, proceed as follows:
1.
Press button
46
Three flashing '0's will appear on the clock display
screen the first time your oven is connected to a
mains electricity supply
2.
. Turn the control knob until
the correct time appears.
N.B. The same procedure should be followed in
order to alter the time on the clock when necessary.
Attention! The set time cannot be altered if a cooking-
time or finishing time has previously been set.
3.
Press button
again in order to set the
time. If you fail to press this
button, then the time shown
will be set automatically after
a few seconds.
once