Advertisement
200 Series
Cold Climate
Sub-Surface
Discharge Unit
!
WARNING:
1. Each person involved in the assembly, Installation and/or maintenance of the
Hydro-Guard Automatic Flushing Device must read this manual carefully and follow
all instructions prior to performing any installation or maintenance procedures
involving the Unit.
2. Verify the drainage path prior to installation to ensure that pedestrian and ve-
hicular hazards will not be created by the installation and use of the Hydro-Guard
Automatic Flushing Device (in areas in which freezing may occur, special attention
should be given to this procedure).
3. Never assemble, disassemble, or perform Hydro-Guard maintenance unless the
influent supply valve has been closed, verified and secured, and internal piping
pressure has been relieved.
4. Always use all necessary safety equipment and follow all recommended pro-
cedures when installing, operating and maintaining the Hydro-Guard Automatic
Flushing Device.
5. Perform annual safety inspections and replace worn or defective parts.
6. Operate the Hydro-Guard Automatic Flushing Device only when fully installed and
correctly assembled.
!
CAUTION:
The recommended optimal operating pressure for a Hydro-Guard® Automatic Flushing
System is between 20 psi and 120 psi. In the event pressure may exceed 120 psi it
is recommended that a Pressure Regulating Valve be installed ahead of the
Hydro-Guard flushing system.
F 12775 6/21
OPERATING INSTRUCTIONS MANUAL
TABLE OF CONTENTS
PAGE
2
3
4
5
6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mueller Hydro-Guard 200 Series
Summary of Contents for Mueller Hydro-Guard 200 Series
- Page 1 OPERATING INSTRUCTIONS MANUAL 200 Series TABLE OF CONTENTS PAGE Installation Instructions Cold Climate Programming Unit Disassembly and Reassembly Instructions Sub-Surface Options and Upgrades Parts Discharge Unit WARNING: 1. Each person involved in the assembly, Installation and/or maintenance of the Hydro-Guard Automatic Flushing Device must read this manual carefully and follow all instructions prior to performing any installation or maintenance procedures involving the Unit.
- Page 2 It is recommended In the event static pressure is for future training, reference, that a 6" catch pipe (by others) be routinely above 120 psi, Mueller troubleshooting, and maintenance. installed inside of the 200 Series recommends installing a Pressure Cold Climate's external cabinet.
- Page 3 200 SERIES COLD CLIMATE SUB-SURFACE DISCHARGE UNIT Programming Unit PROGRAMMING HYDRO-GUARD UNIT FOR OPERATION 200 Series Cold Climate 8. Once the device is connected, it be enabled in order for the App to will appear on the home screen when connect to the BL-KR device.
- Page 4 200 SERIES COLD CLIMATE SUB-SURFACE DISCHARGE UNIT Disassembly and Reassembly Instructions 200 SERIES COLD CLIMATE DISASSEMBLY AND REASSEMBLY INSTRUCTIONS TOOLS NEEDED: HG-A2023 Security Tool, Phillips screwdriver, flat-head screwdriver 3. Using the a standard iOS 9. Match up the top cover of the Although the Hydro-Guard®...
- Page 5 200 SERIES COLD CLIMATE SUB-SURFACE DISCHARGE UNIT Options and Upgrades HYDRO-GUARD® FEATURES, OPTIONS AND UPGRADES The following is a brief overview conservation. S.M.A.R.T. Upgrade and introduction to Hydro-Guard® Dechlorination (Included) The 200 Series Cold Climate is not Sampling, Options and Upgrades. upgradeable to Smart technology;...
- Page 6 200 SERIES COLD CLIMATE SUB-SURFACE DISCHARGE UNIT Parts ID PART # DESCRIPTION HG-2201 UV Protective Housing 546553 Dechlorination Sub Assembly HG-S124 Latching Sub Assembly HG-A2006 TD Key HG-123100 2" Composite Control Valve HG-S125 2" Cam-lock HG-S106 Bottom Plate Sub Assembly Bluetooth Controller (Bury depth FC200-BL required for actual part number)
- Page 7 NOTES...
- Page 8 LIMITED WARRANTY This Hydro-Guard"" Automatic Flushing Device is warranted for one year from the date of delivery. Mueller will repair or replace any defective part or component as long as the unit is installed and operated in accordance with the procedures described within this manual. Damage or failure caused by the improper installation, assembly, disassembly, maintenance or operation of the Hydro-Guard Automatic Flushing Device is not covered by the terms of this warranty.
Need help?
Do you have a question about the Hydro-Guard 200 Series and is the answer not in the manual?
Questions and answers