CONTENTS Safety regulations Basic principles of work To start the device follow the steps Control panel & menu Replacing the cartridge Maintenance: cleaning, storage, transportation Troubleshooting Specifications EEE Waste Legal Information...
SAFETY REGULATIONS — Do not clean the device with gasoline, window-washing liquid, corrosive substances, or any organic solvent. The warranty does not cover damages caused by improper cleaning. When using electrical appliances, basic safety precautions should — In case of a leak or if water spills onto the surface of the device, always be followed, including the listed below: immediately disconnect the power cord and let the device dry WARNING!
BASIC PRINCIPLES OF WORK — Do not try to touch the fan or block it with any foreign objects while it’s in operation. — Do not touch the power supply or power cord with wet hands. — Do not place the device next to a heating electrical equipment 2A 5V and other heat sources, including naked flames.
TO START THE DEVICE Use the screen and control wheel to navigate through the menu and adjust the airflow and other features. FOLLOW THE STEPS Move the front grills to adjust the airflow direction. The temperature of the outgoing air will start to decrease in a few Ensure the device is placed on the flat horizontal surface first.
Visit evapolar.com/en/shop to make a purchase. units icon TIP: If for any reason you are unable to connect your device to a direct - LED lighting - Sleep timer icon power source (eg, while camping), you can use a power bank.
Page 7
LED LIGHTING BRIGHTNESS ADJUSTABLE FRONT GRILL To choose your preferred brightness level for the Adjust the airflow by tilting the front water reservoir lighting, rotate the control wheel. grills up and down. Press the screen to confirm your choice. Making it 0% turns off...
REPLACING THE CARTRIDGE Disconnect the device from the power source. Remove the reservoir by sliding it up. Use both hands to lift the upper part of the body. Push on both sides of its base to release the locks and then slide it upwards. Unlock and move the control unit upward and to the side.
MAINTENANCE: CLEANING, STORAGE DURING LONG PERIODS OF NO USAGE STORAGE, TRANSPORTATION If you’re not intending to use the device for more than 5 days, we We strongly recommend drying the device totally before cleaning, strongly recommend the following: storage, and long-distance transportation. To do this, you need to •...
TROUBLESHOOTING SOLUTION: Pour a full tank of clean, distilled water and let the device completely dry out (this may take several times to remove the smell completely) PROBLEM: Cold air does not come out of the device despite the fact the cartridge is wet PROBLEM: There is water near the device POSSIBLE CAUSE 1: Humidity level over 70% POSSIBLE CAUSE: Should be reviewed properly with a support...
EEE WASTE SPECIFICATIONS Please, dispose of the cartridge and the device Input voltage / current 5 V / 2 A according to the state law. Power consumption 10 W Cooling power 100 W - 350 W / 340 - 1190 BTU/hr LEGAL INFORMATION Coverage area Up to 3 m...
Page 12
with rated current ≤16A per phase and not subject to conditional connection — EN 60335-1:2012/AC:2014/A11:2014 - Household and similar electrical appliances. Safety. Part 1: General requirements — EN 60335 -2-40:2003/ A11:2004/ A12:2005/ C1:2006/ A1:2006/ A2:2009/ C2:2010/ A13:2012/ A13/AC:2013 - Household and similar electrical appliances.
Need help?
Do you have a question about the evaLIGHTplus EV-1500 and is the answer not in the manual?
Questions and answers