Post Flight; Service And Repairs - Horizon Fitness hobbyzone Apprentice S2 Instruction Manual

Post Flight

NOTICE: When you are finished flying, never keep the aircraft in the sun.
Do not store the aircraft in a hot, enclosed area such as a car. Doing so can
damage the foam.
Post Flight Checklist
1. Disconnect Flight Battery
2. Power off transmitter
3. Remove flight battery from aircraft
4. Recharge flight battery
5. Repair or replace all damaged parts
6. Store flight battery apart from aircraft and monitor the battery charge
7. Make note of flight conditions and flight plan results, planning for
future flights

Service and Repairs

NOTICE: After any impact or replacement, always ensure the receiver is secure
in the fuselage. If you replace the receiver, install the new receiver in the same
orientation and manner as the original receiver or damage may result.
Thanks to the EPO foam material in the wing and fuselage of this aircraft, repairs
to the foam can be made using virtually any adhesive (hot glue, regular CA
(cyanoacrylate adhesive), epoxy, etc). However, use only foam-compatible CA,
foam-compatible accelerant or epoxy on the vertical and horizontal tail material.
When parts are not repairable, see the replacement parts list for ordering by
item number. For a listing of all replacement and optional parts, refer to the list
at the back of this manual.
®
18