Advertisement
Try moving it to a spot closer to your router with few walls
between the router and your camera.
You can purchase a WiFi extender to increase your wifi range.
You can create a separate 2.4GHz network just for your smart
devices. This will provide dedicated bandwidth and cache
memory for your smart devices, separate from all the other
devices you use in your home. You can create a new 2.4GHz
network manually in your router seמּings or by contacting your
Internet Service Provider and asking them to turn on a 2.4GHz
guest network.
C) Controlling your camera
To turn on Motion Detected recording, insert a microSD card
(not included, max 128gb) and turn on the PIR sensor.
If the PIR Sensor is not on, the camera will not be able to
detect motion and the camera will not record.
Due to the low-power state the camera uses to conserve
baמּery, there is no full time recording available.
Motion Detection screenshots can be found in the Main Menu
Notification Center. From the Home page, click the three lines
in the top leﬞ, and then click Notifications.
Two Way Audio.
By default, the camera will only use the microphone OR the
speaker. When you click the microphone on the live view, you
will be able to speak through the camera, and when you click
the microphone again to turn it off, the speaker will
automatically turn on so you can hear whats being said at the
camera.
Advertisement
