Audio Connections; Loudspeaker Connection; Specifications - Behringer V-Tone GM110 User Manual

V-TONE GM110

4. AUDIO CONNECTIONS

The BEHRINGER V-TONE GM110 is fitted with audio inputs and
outputs in the form of 1/4" mono jacks. The exceptions to this are
the headphones output and the D.I. OUT.
Please ensure that only qualified personnel install
and operate the device.
Please make sure that all units have a proper
ground connection. For your own safety, never
remove or disable the ground conductor of the unit
or of the AC power cable. Instead, you can eliminate
hum problems caused by grounding (e.g. when
connected to a mixing console) by pressing the
GND switch (Groundlift,
Fig. 4.1: 1/4" TS connector (input, FX send, FX return,
speaker)
4.2: Wiring of a stereo headphones plug
Fig. 4.3: XLR connectors (D.I. Out)
8
socket) that allows you to hook up a supplementary speaker.
Optimum adaptation of the amp to the loudspeaker is ensured
with an 4
maximum power output will drop in proportion to the resistance
connected.
).
AUDIO INPUTS
Guitar input
FX return
AUDIO OUTPUTS
FX send
D.I. Out
LOUDSPEAKER OUPUT
Connector
Load impedance (nom.)
SYSTEM SPECIFICATIONS
Power amp output
LOUDSPEAKER
Type
Impedance
Power handling
POWER SUPPLY
Mains voltage
Power consumption
Fuse
Mains connection
DIMENSIONS/WEIGHT
Dimensions (H x W x D)
Weight
BEHRINGER is constantly striving to maintain the highest quality standards. Modifications
may be made to existing products without prior notice. Specifications and appearance may differ
from those listed or illustrated.

5. SPECIFICATIONS

4.1 Loudspeaker connection

The GM110 features a loudspeaker connection (mono jack
Ω
loudspeaker. With too high an impedance load, the
Do not use an instrument cable to connect an
external loudspeaker, rather use a special
loudspeaker cable. This
unnecessary losses of sound and output.
5. SPECIFICATIONS
Connector 1/4" mono jack socket
Type RF filtered input
Input impedance approx. 1 M
Connector 1/4" mono jack socket
Input impedance approx. 1 M
Connector 1/4" mono jack socket
Type Low-impedance line level output
Output impedance approx. 100
Connector XLR
Type Balanced, low-impedance line
level output
Output impedance approx. 100
Max. output level +22 dBu
1/4" mono jack socket
4
30 Watts RMS into 4
10" Vintage loudspeaker, model
BUGERA
4
60 Watts (BUGERA
USA/Canada
China/Korea
U.K./Australia 230 V~, 50 Hz
Europe
Japan
70 W maximum
100 - 120 V~: T 2 A H 250 V
200 - 240 V~: T 1 A H 250 V
Standard IEC receptacle
approx. 15" (381 mm) x 14 ½"
(369 mm) x 9 ½" (242 mm)
approx. 12.5 kg
will prevent any
Ω
unbalanced
Ω
unbalanced
Ω
unbalanced
Ω
Ω
Ω
TM loudspeaker
Ω
)
TM
120 V~, 60 Hz
220 V~, 50 Hz
230 V~, 50 Hz
100 V~, 50 - 60 Hz