Before You Begin; Control Elements - Behringer Ultratwin GX210 User Manual

1.2 Before you begin

Your BEHRINGER ULTRATWIN was carefully packed in the factory and the packaging is designed to protect
the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its
contents for any signs of physical damage, which may have occurred during transit.
+
If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer and the
shipping company immediately, otherwise claims for damage or replacement may not be
granted. Shipping claims must be made by the consignee.
Be sure that there is enough space around the unit for cooling and please do not place the ULTRATWIN on high
temperature devices such as radiators etc. to avoid overheating.
+
Before you connect your ULTRATWIN to the mains, please make sure that your local voltage
matches the voltage required by the unit!
The mains connection of the ULTRATWIN is made by using the enclosed mains cable and a standard IEC
receptacle. It meets all of the international safety certification requirements.
+
Please make sure that all units have a proper ground connection. For your own safety, never
remove or disable the ground conductor of the unit or of the AC power cable.
The MIDI connection (IN) is made over standardized DIN plug-in connectors. An optocoupler has been used for
isolated data communications.
You will find additional information in chapter 5 "INSTALLATION".

1.3 Control elements

The BEHRINGER ULTRATWIN GX210 features 13 controls, six push-buttons and one 2-digit, 7-segment LED
display on its front panel. Additionally, there are two 1/4" jacks for input.
8
ULTRATWIN GX210
Fig. 1.1: The front panel of the ULTRATWIN GX210
1. INTRODUCTION