Error Codes - Eagle Tugs MTT 2012 Series Parts And Service Manual

M
AINTENANCE
Should the MTT have a system error, the built in diagnostics can show one or several of the below error codes and
descriptions. When calling Eagle Tech Support, please have any displayed errors readily available. This will allow
us to troubleshoot your issue as fast as possible.
1: SWITCH ACTIVE AT KEYON
2: DIRECTION ERROR
3: TRACT POT ERROR
4: UNDERVOLTAGE ERROR
5: OVERVOLTAGE ERROR
6: CAN ERROR ERROR
7: UNDEFINED ERROR
8: UNDEFINED ERROR
9: UNDEFINED ERROR
10: WARN. TRACTION DC BUS LOW
11: WARN. TRACTION DC BUS HIGH
12: WARN. TRACTION SPEED SENSOR
13: WARN. TRACTION MOTOR TEMP LOW
14: WARN. TRACTION MOTOR TEMP HIGH
15: WARN. TRACTION TEMPERATURE SENSOR
16: WARN. TRACTION HEAT SINK TEMP LOW
17: WARN. TRACTION HEAT SINK TEMP HIGH
18: WARN. TRACTION HEAT SINK TEMP SENS
19: WARN. TRACTION OTHER
20: WARNING LOW BATTERY
21: ERR. TRACTION SHORT CIRCUIT
22: ERR. TRACTION LOW VOLTAGE
23: ERR. TRACTION HIGH VOLTAGE
24: ERR. TRACTION MOTOR TEMP HIGH

ERROR CODES

25: ERR. TRACTION HEAT SINK TEMP HIGH
26: ERR. TRACTION NOT RESPONDING
27: ERR. TRACTION OTHER
28: ERR. TRACTION
29: ERR. TRACTION OTHER
30: LOW BATTERY VOLTAGE LEVEL
31: THROTTLE FAULT
32: DC DC CONVERTER FAULT
QA014 REV06 08.04.12
99