Technical Data - HAEGER Max Mixer Pro User Instructions

NOTE: Start mixing at the slowest speed, gradually increasing to the required
level. For kneading, we recommend using the higher speed settings.
IMPORTANT: The appliance is equipped with a special mechanism that makes
the bowl rotate at a regular speed.
- To add more ingredients to the mix or to change the type of attachment, it is
necessary to switch off the appliance, using the relevant button and unplug it
before lifting the hand mixer as described previously.
- After use, switch off the appliance and unplug the power cord from the
power mains.
- Lift the arm of the support by pressing the arm tilt button and remove the
hand mixer, complete with attachments, using the release button on the back
of the appliance.
- Remove the attachments as described previously and then remove the bowl.
NOTE: In case of space problems or for use with different bowls, it is possible to
use the hand mixer separately from the support.
Cleaning
Before cleaning any part on the hand mixer, set the speed selector to the 0
position. Then unplug the mains cable from the wall socket and release the
rods. Make sure to dry all of the parts before reusing them.
The rods can be washed in hot soapy water or in the dishwasher. The hand

mixer motor housing and the mains cable should be wiped clean with a
damp cloth.
To remove stubborn stains, clean with a cloth slightly dampened with soapy

water or a mild, non-abrasive, cleaning agent. Finish off with a clean damp
cloth.
Do not use abrasive cleaning products.

DO NOT IMMERSE THE HAND MIXER OR CABLE IN WATER OR ANY OTHER

LIQUID.

Technical Data

Model:
Power supply:
Max. Power:
Instructions for use
BL-5BW.009A
220-240V~, 50 Hz
500W
English
5